Sand Blasting

About Sand Blasting

We are leading manufacturer of Sand Shot Blasting

Shot blasting is the Cheapest and most effective method for Surface Preparation Shot Blasting provides a uniform and consistent fine matt or rough surface. The surface becomes perfectly suitable for painting, galvanizing and metal spraying

Shot blasting can form permanent bond between shot blasted surface and protective coating like paint, zinc and epoxy powder coating etc. It also reveals surface defects in the metal. It increases the life of protective coating adheres tenaciously to the scale-free, blast cleaned surface. Thus maintenance cost for repainting can be considerably reduced 

Restrictive environmental legislation and a greater awareness of health hazards were the main reasons for development of Vacuum Blasting Machines. The advantages of the equipment are not limited to preventing environmental and health problems, in many applications it is also a fully justified method of surface preparation on an economic basis.

Disposal costs of hazardous waste is minimal by the use of recyclable abrasives, so the amount of abrasives used is much lower than compared with open-blasting. The equipment has many applications. Besides for construction and maintenance of ships, the equipment can also be used for the maintenance of bridges, machinery, power plants or for the renovation of concrete. Steel, shipbuilding , offshore and (petro) chemical industries and also for maintenance purpose in the civil works sector such as cleaning bridges , tunnels and buildings etc.

These are tailor-made or custom built machines designed for specific purposes wherein the work pieces may be tumbled, rotated, rolled, carried, and even pushed, all according to necessity, convenience and economy. In these machines the work is carried upon hangers suspended from an overhead monorail.

This type of machine may be classed as a single or multiple pass, indexing, spinner hanger or straight through type. Again the machine may be single or multi wheel type depending on the product size and the required output. The overhead conveyor type machine can be designed to carry weights up to 4 tons per hanger.

 The layout of monorails circuits may be unlimited in variety. Overhead plants have two outstanding features; continuity of production and flexibility. There are very few work pieces that are not capable of being suspended by some type of suitable hanger. These help in Plate Cleaning Machine, Plate Blasting Machine, 

Sheet Blasting Machine, and Vessel Cleaning Machine & Hanger Type Machine

Features:

         Remove rust, mill scale, heat scale and carbon build up from metals

         Strip paint, powder coating, plating and anodising from parts for rework

         Eliminate burrs, parting lines, flashing and other

         defects from castings and injection-molded parts

         Extract residual sand from castings

         Sand Removal

         Tube Cleaning

         Beautify steel, stainless steel, aluminium, brass and other metals with a matte finish

         Etch artwork and lettering into glass, stone, plastics, metal and other material

         Clean release agents and material buildup from molds

         Top quality

         Sturdy construction

         Flawless functionality

         Very durable

Specifications:

• Automatic Grade: Manual / Semi Auto / Automatic
• Capacity : 5 to 30 ton /day
• Machine Type: Portable Type

• Number of Doors: Single Door / Double Door
• Material: Stainless Steel / MS
• Power Source: Electric
• Installation: Pedestal
• Diameter: 400 and 500mm
• Wind Capacity: 5500 M3/H

Adaptable Blasting Media for Varied Applications

Sand Blasting systems are engineered to support multiple abrasive materials, including sand, grit, glass beads, and aluminium oxide. This flexibility allows users to select the appropriate blasting media based on the specific demands of cleaning, surface preparation, or paint and rust removal tasks, ensuring optimal results regardless of the substrate or industrial application.


Robust Construction and Advanced Nozzle Technology

To withstand rigorous industrial environments, Sand Blasting equipment features nozzles made from premium boron carbide or tungsten carbide, ensuring extended service life and high resistance to wear. The machines can be tailored in capacity and are available in both portable and stationary forms, meeting the diverse needs of construction sites, automotive workshops, shipyards, and metal fabricators.


Safe and User-Friendly Operation

Equipped with comprehensive safety features such as protective clothing, integrated dust collectors, and safety interlocks, Sand Blasting prioritizes operator safety. The systems can be operated manually or automatically, offering user-friendly controls and requiring compressed air as the power source for consistent and powerful blasting performance.